| After-sales Service: | 12 Months |
|---|---|
| Warranty: | 12 Months, 1 Year |
| Type: | Ultrasonic Thickness Gauge, Ultrasonic |
| Material: | Plastic, Plastic |
| Measure Method: | Automatic, Automatic |
| Accuracy: | A, 0.05mm |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier UM-5 series is the introduction of a new generation of thickness gauges, breakthrough technology for your maximum to solve a variety of measurement problems. It greatly improves the performance of conventional ultrasonic gauges, with better measurement stability and repeatability. Widely used in petrochemical, power, boat and pipe, pressure vessel and storage tank wall thickness measurement. Can measure the thickness of metal materials, pipes, pressure vessels, sheet (steel, aluminum), plastic, iron pipe, PVC pipe, glass and other materials.
The main function
2.4-inch QVGA (320 × 240 dot matrix) color OLED screen, contrast 10000: 1,
Color real-time A / B scanning, through the echo display can help users better control of the measurement, so that a wider range of thickness, the measurement value is more accurate, but also to avoid measurement and material-related errors. Zero-wave, full-wave, update rate, B-scan maximum / minimum, and other parameters can be set, such as gain, blanking, gate, range, delay, radio frequency, backward RF, positive half-wave, negative half- The thickness value and the waveform color change dynamically when coupling or alarm.
Penetration coating function: for the removal of the paint layer of the substrate net thickness measurement
Large capacity storage function: can store 100,000 thickness and 1000 sets of waveforms
Technical Parameters
| Display screen | 2.4QVGA (320 × 240) color OLED screen, contrast 10000: 1 |
| working principle | An ultrasonic pulse echo method using a twin crystal probe |
| Measuring range | Standard mode: 0.5 to 508 mm (0.025 to 20.00 inch) Coating mode: Substrate thickness 3.0 - 50mm (for the removal of the paint layer of the substrate net thickness measurement) Coating thickness of less than 8mm Depending on the probe used, the material to be measured and the surface condition |
| Pipe measurement lower limit (steel) | Φ20×3mm(PT08 Probe) Φ15×2mm(PT06 Probe) The indication error does not exceed ±0.1mm |
| Measure the resolution | 0.01 or 0.1mm(0.001 or 0.01in) |
| Unit | mm or inches |
| Indication error | ±0.05mm (H≤10mm) ±(0.5% H+0.01 ) (H>10mm) Note: H is the thickness of the measured object |
| Indication stability | Using a breakthrough zero-crossing measurement technique, the thickness measurement is not affected by the attenuation strength of the material, the gain and the gate height, and has high measurement stability and reliability. |
| Repeatability | 0.05mm |
| Gain | High, medium and low third gear adjustable |
| Display mode | Thickness value mode, minimum / maximum capture mode, difference / reduction rate mode |
| storage | 100,000 thickness values and 1000 sets of waveforms can be connected to the computer to export data, the data can be statistics, analysis, archiving, printing reports and other operations. |
| Communication Interface | USB 2.0 Full Speed interface |
| V path correction | Automatic V sound path correction, compensation for dual crystal probe non-linearity |
| Measure the update rate | 4HZ per second, 8HZ, 16HZ optional |
| Material sound velocity range | 500-9999m/s,0.0179-0.3937in/us |
| Working language | Chinese, English, Japanese, German, French five languages to choose from |
| Alarm settings | Maximum / minimum alarm, dynamic changes in the thickness of the alarm when reading the color |
| Power | Two 1.5V AA batteries |
| Operating time | Two AA batteries, the use of time is greater than 35 hours |
| Shut down | Optional 5,10,20 minutes without operation after the automatic shutdown, or can only manually shut down |
| Operating temperature | -10 to +50 ºC, with special requirements up to -20 ºC |
| Dimension | 153mm×76mm×37mm(H×W×D) |
| Weight | Containing the battery 280g |
| warranty period | 1year |
| Number | Name | Model | Quantity |
| 1 | Thickness gauge host | UM-5DL | 1 |
| 2 | Standard probe | TC510 | 1 |
| 3 | Instrument box | None | 1 |
| 4 | Alkaline batteries | 1.5V | 2 |
| 5 | Coupling agent 50g | None | 1 |
| 6 | USB cable | USB2.0 | 1 |
| 7 | Communication software CD | DataView | 1 |
Q1: Why Choose NANBEI ?
(1).Professional manufacturer with more than 14 years experience
(2).Exported to more than 97% Countries
(3).Turnkey Solution is no problem
Q2:OEM,ODM acceptable or not?
Absolutely Yes
Q3:What's kind of Payment terms for customer choosing?
T/T ,Western Union, Money Gram , Credit Card, Paypal , L/C ...
Q4:Can we visit your factory online?
Absolutely no problem
Q5:Can online video inspection before shipment?
Absolutely no problem
Q6: what's the MOQ ? Sample order is OK?
MOQ:1 set, sample order is no problem
Q7:What's kind of shipment for customer choosing?
Usually ship by sea, by air, by international express .
We can also provide reasonable solutions according to your transportation requirements
Q8:How to ensure product quality and after-sales service?
We have CE, ISO quality certificate, and SGS authentication.
After-sale service:
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}