| After-sales Service: | Long-Term |
|---|---|
| Warranty: | 1year |
| Type: | Freeze Drying Equipment |
| Application: | Powder |
| Fuel: | Gas |
| Operating Pressure: | Vacuum |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
Vacuum freeze dryers are widely used in the fields of medicine, pharmaceuticals, biological research, chemicals and food. The lyophilized articles are easy to store for a long time, and can be restored to the state before lyophilization and maintain the original biochemical characteristics after adding water. LGJ-18 freeze dryer, suitable for laboratory use or small production, to meet the routine freeze-drying requirements of most laboratories.
Technical parameter:
| Model | LGJ-18 series vacuum freeze dryer | |||
| Standard type | Standard manifold | Stopper type | Stopper manifold | |
| Freeze-dried area | 0.18/0.27m2 | 0.09m2 | ||
| Material plate size | Ф240mm | Ф200mm | ||
| Number of material trays | 4 / 6 | 3 | ||
| Material plate spacing | 70mm | |||
| Cold trap temperature | ≤ -56 ° C (no load), optional ≤ -80 ° C (no load) | |||
| Cold trap depth | 400mm | |||
| Cold trap diameter | 270mm | |||
| Water catching capacity | 6kg/24h | |||
| Pumping rate | 4L/S | |||
| Ultimate vacuum | ≤5pa (no load) | |||
| Installed power | 1400W | |||
| Host weight | 105KG | |||
| Mainframe dimensions | 630 × 580 × 970mm | |||
| -80 °C mainframe dimensions | 810 × 580 × 950mm | |||
| Drying chamber size | Ф300×445mm | Ф300×465mm | Ф300×540mm | φ300×570mm |
| Cooling method | air cooling | |||
| Defrost mode | naturalized cream | |||
| Plate loading material | 1.8L/2.7L (material thickness 10mm) | 0.9L (material thickness 10mm) | ||
| Eggplate size & quantity | - | 100/250/500/1000ml, 2 each |
- | 100/250/500/1000ml, 2 each |
| Vials quantity | - | - | Ф 12mm: 615 | Ф 12mm: 615 |
| - | - | Ф 16mm: 345 | Ф 16mm: 345 | |
| - | - | Ф 22mm: 183 | Ф 22mm: 183 | |
| Photo | ||||
| EXW price | USD3595 | USD3735 | USD4173 | USD4314 |
| Model | Application difference |
| LGJ-18 Standard type | Suitable for freeze drying of conventional materials in bulk (liquid, paste, solid) |
| LGJ-18 Stopper type | It is not only suitable for the freeze-drying of conventional materials in bulk (liquid, paste, solid), but also suitable for the drying of the bottled materials of vial. When preparing for lyophilization, the materials are dispensed into the vials as needed, and the caps are floated and frozen. Drying, after the end of drying, the capping device is pressed tightly to avoid secondary pollution, re-adsorb moisture, and easy to store for a long time. |
| LGJ-18 Standard manifold | It is suitable for freeze-drying of bulk (liquid, paste, solid) conventional materials, and can be used to pick up the flask outside the drying chamber to dry the material that is frozen on the inner wall of the bottle. At this time, the flask is used as a container to be connected to the outside of the drying oven. On the tube, the material in the flask is heated at room temperature, and the multi-manifold switch device can be used to remove or load the flask as needed without stopping. |
| LGJ-18 Stopper manifold | On the basis of the common type characteristics, it combines the characteristics of the gland type and the multi-tube type. · Suitable for freeze drying of conventional materials in bulk (liquid, paste, solid); ·It is suitable for the drying of the bottled materials of Xilin. When preparing for lyophilization, the materials are packed into the vials as needed. After the caps are floated, the caps are freeze-dried. After the drying, the capping device is pressed to tighten the caps. Contamination, re-adsorption of water, easy to preserve for a long time; ·The flask is attached to the outside of the drying chamber, and the material frozen on the inner wall of the bottle is dried. At this time, the flask is connected as a container to the manifold outside the drying box, and the material in the flask is heated at room temperature through a multi-manifold switch device. The flask can be removed or loaded at any time as needed without downtime. |
Click the photo to get more details:
FAQ:
Q1: Why Choose NANBEI ?
(1).Professional manufacturer with more than 13 years experience
(2).Exported to more than 97% Countries
(3).Turnkey Solution is no problem
Q2:OEM,ODM acceptable or not?
Absolutely Yes
Q3:What's kind of Payment terms for customer choosing?
T/T ,Western Union, Money Gram , Credit Card, Paypal , L/C ...
Q4:Can we visit your factory online?
Absolutely no problem
Q5:Can online video inspection before shipment?
Absolutely no problem
Q6: what's the MOQ ? Sample order is OK?
MOQ:1 set, sample order is no problem
Q7:What's kind of shipment for customer choosing?
Usually ship by sea, by air, by international express .
We can also provide reasonable solutions according to your transportation requirements
Q8:How to ensure product quality and after-sales service?
We have CE, ISO quality certificate, and SGS authentication.
After-sale service:
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}