New Type Automatic Control Laboratory Small Spray Dryer with Competitive Price

• After-sales Service: Free Spare Part, Online Support, Video Technical S
• Warranty: 1 Year
• Heating Mode: Electrical Heating
• Material Status: Solution, Cream
• Atomization: Gas Atomization
• Flow: Contra-Flow
• Model NO.: NB-8000S
• Heat Source: Electricity
• Type: Airflow Spray
• Product Type: Experimental Airflow Spray Dryer
• Product Model: Nb-8000s
• Water Evaporation: 1500-2000ml/H
• Minimum Feed Capacity: 50ml
• Drying Chamber Diameter(mm): 220
• Atomization Structure: Atomization System
• Electronic Control System: Special for Small Atomization System
• Maximum Inlet Air Temperature: ~250 Degree (Adjustable)
• Hot Air Situation: Air Supply
• Heater Capacity: 3.5kw
• Power (Kw): 4.5kw
• Dimensions (mm)(L*W*H): 800X600X1300
• Installation Weight (Reference): 100kg
• Power Supply: 220V,50Hz(Customizable)
• Compressor [Power (Kw), Air Volume (L/Mi: 0.58, 36
• Transport Package: Wooden Case
• Specification: 800x600x1300 mm
• Trademark: NANBEI
• Origin: Zhengzhou, Henan
• HS Code: 8419399090
• Production Capacity: 2000 Sets/Month

Product Description

New Type Automatic Control Laboratory Small Spray Dryer With Competitive Price

Mini Spray Dryer Equipment for Milk/Mango/Juice/Coffee/Egg Powder/Detergent/Stevia/Spirulina/Starch

Product Description

The small/experimental/micro spray dryer is mainly suitable for the production of micro-granular powder in the laboratories of universities, research institutes and food, medicine and chemical enterprises.
Application industry:
Spray dryers are widely used in a wide range of industries, such as: food, chemical, pharmaceutical, cosmetics, fine ceramics, materials, dairy products, health products, environmental protection, biology, lubricants, additive industries, etc.
Material type:
Materials with fluidity, such as aqueous solutions, emulsions, suspensions, pastes, etc., can be pumped into the atomizer with a peristaltic pump.
Equipment principle:
The material liquid is sprayed into fine droplets by the atomizer and dispersed in the hot drying medium (hot air flow), the solvent is quickly evaporated to obtain a solid product, and the gas-solid separation is realized, and the products are mostly powder or small particles.

Features:
1. Color LCD touch screen parameter display: air inlet temperature / air outlet temperature / peristaltic pump speed / air volume / needle frequency.
2. Fully automatic control: one-button start-up, after setting the spray process parameters, the temperature reaches the predetermined temperature, the peristaltic pump starts automatically, the running animation is displayed on the touch screen, and the running process is clearly displayed;
3. Nozzle cleaner (through needle): When the nozzle is blocked, the blockage is automatically removed, and the frequency of the needle through can be adjusted by itself.
4. Shutdown protection function: When the heater is turned off, the fan cannot be turned off when the heater is above 60°C, to ensure that the heating part of the equipment will not be burned out due to misoperation (forcibly turning off the fan).
5. Temperature control: The real-time PID constant temperature control technology is adopted, the temperature control is accurate in the whole temperature area, and the heating temperature control accuracy is ±1°C.
6. Finished product effect: The normal distribution of particle size of the finished product is steep, the particles are uniform, and the fluidity is good.
7. Air compressor: Built-in imported oil-free air compressor with low noise, less than 60db.

Details Images

Standard fan introduction:
The vortex air pump fan is a new type of air pump with both blowing and suction, compact structure, beautiful appearance, no water, no oil, easy to use, all copper wire coil, the casing is made of high-quality aluminum alloy by one-time die-casting, imported accessories, extended service life.
The accessories of each part are verified by accurate calculation, and the parts are processed in the machining center to ensure the accuracy, and the performance is 20% higher than that of similar products under the same power fan.
 

Glass spare parts
peristaltic tube 2m
Drying chamber (glass) 1pc
Cyclone separator (glass) 1pc
Receiving bottle (glass)  1pc

If you need stainless steel spare parts, we also can do it for you.



 

NANBEI custom two-fluid atomizer
Advantages and Features:
The 8000 series is equipped with a two-fluid atomizer. The spray gun of this series of atomizers is equipped with an air cap. The air cap is a metal one-piece structure. The overall structural strength is high, and the stability of gas circulation can be greatly improved.
air cap
Metal Integrated air cap
 

 

All kinds of spraying powder showing:

Product Parameters

NB-8000S Parameter
product type	Experimental Airflow Spray Dryer	Product model	NB-8000S
water evaporation	1500-2000ml/h	Minimum feed capacity	50ml
Drying Chamber Diameter(mm)	¢220	Atomization structure	Atomization system(NB-OY1-C-W2019)
Electronic control system	Special for small atomization system(NB-WC-ES-VER2018-1A)	Maximum inlet air temperature	~250ºC (adjustable)
Hot air situation	air supply	Heater capacity	3.5kw
Blower [power (kw), air volume (m³/h)]	[0.55,108]	Compressor [power (kw), air volume (L/min)]	[0.58,36]
Power (kw)	4.5Kw	Dimensions (mm)(L*W*H)	800×600×1300
Installation weight (reference)	100Kg	Power supply	220V,50hz(customizable)
brief introduction	1.The atomization chamber, cyclone separator, material collection bottle and waste collection bottle are made of high borosilicate glass. 2. The casing is made of SUS304. 3. Equipped with the original QFN-VER-2L drying system. 4. The atomization process can be clearly viewed. 5. Cloth bag device (optional): improve the recovery rate.

Packaging & Shipping

Company Profile

FAQ

Q1: Why Choose NANBEI ?
(1).Professional manufacturer with more than 14 years experience
(2).Exported to more than 97% Countries
(3).Turnkey Solution is no problem

Q2:OEM,ODM acceptable or not?
Absolutely Yes

Q3:What's kind of Payment terms for customer choosing?
T/T ,Western Union, Money Gram , Credit Card, Paypal , L/C ...

Q4:Can we visit your factory online?
Absolutely no problem

Q5:Can online video inspection before shipment?
Absolutely no problem

Q6: what's the MOQ ? Sample order is OK?
MOQ:1 set, sample order is no problem

Q7:What's kind of shipment for customer choosing?
Usually ship by sea, by air, by international express .
We can also provide reasonable solutions according to your transportation requirements

Q8:How to ensure product quality and after-sales service?
We have CE, ISO quality certificate, and SGS authentication.

After-sale service:

1. Warranty : 1 year
2. We supply free part for quality problem in warranty
3. Long life technical support and service