Nanbei Hospital Medical Hydrogen Peroxide Plasma Sterilizer H2O2 Sterilization

• Customization: Available
• Theory: Pressure Steam
• Type: Pressure Steam Sterilization Equipments
• Model NO.: HTYD-200L
• Electric Tension: 380V
• LCD Display: With LCD Display
• Ultra High Temperature Alarm: Ultra High Temperature Alarm
• Sterilization Information Recording and Printing: Sterilization Information Recording and Printing
• Material: Stainless Steel
• Transport Package: Standard Export Hard Wooden Case
• Trademark: NANBEI
• Origin: China
• HS Code: 8419409090
• Production Capacity: 1000sets/Month

Product Description

 NANBEI Autoclave Sterilization Equipment Hydrogen peroxide low temperature plasma sterilizer

Product Description

Principle Introduction:

The hydrogen peroxide low-temperature plasma sterilization system uses hydrogen peroxide (H2O2) as a sterilizing agent. In a low-temperature environment, the vaporized hydrogen peroxide (H2O2) is formed into a hydrogen peroxide (H2O2) plasma state through an electromagnetic field. Combined with hydrogen peroxide (H2O2) gas and hydrogen peroxide (H2O2) ionomers, indoor items are subjected to low-temperature and dry sterilization, and residual hydrogen peroxide (H2O2) can be effectively dissociated.
 

Detailed Photos

 

Product Parameters

1	Model	HTYD-180L	HTYD-200L
2	Cavity structure and material	The cavity structure is rectangular, the cavity material is made of 304 stainless steel, the thickness is 5mm, and the glow ion network is aluminum alloy 5052, the thickness is 3mm.
3	Sterilizer liner	Stainless steel body, hexahedral silicone plate heating, independent temperature control in all directions, good thermal conductivity, uniform temperature, and effectively guarantee the sterilization effect.
4	Sterilization room door	It adopts ejector-driven electric lift door, ★Double-layer sealed design, the door is equipped with a safety system to ensure equipment and personal safety, anti-pinch design, front and rear double doors.
5	Sterilant	Adopt high-purity hydrogen peroxide injection (concentration 58%), with an inverted hydrogen peroxide automatic dosing system to ensure that workers do not directly touch the liquid. The amount of hydrogen peroxide added is adjustable. The amount of each injection can be observed. It has a refrigerated storage device for sterilant below 20°C.
6	Sterilization method	Hydrogen peroxide plasma technology
7	Sterilization speed	Rapid sterilization time≤25min; standard sterilization time≤35min; enhanced sterilization time≤50min
8	Sterilization temperature	50ºC±5ºC
9	Main Controller PLC	Original imported: control and display working process parameters, easy to operate
10	Mini printer	Multi-channel records, record sterilization related parameters, clear records, long service life
11	Pressure Transmitters	Original imported (Germany): good precision, high reliability, stable output
12	Temperature Sensor	Good stability and small measurement error
13	Sterile filter	Original imported: ultra-fine aseptic filtration, sterilization rate reaches 100%
14	RF power source	Frequency 13.56MHz, maximum power 500W
15	Electromagnetic valve	Highly corrosion-resistant materials made in Shanghai, reliable operation and long life
16	Chamber temperature heating power	1800w, no need to preheat
17	Vacuum pump	Using a rotary vane vacuum pump with extremely high vacuum and resistance to H202 corrosion, the pumping rate can reach 16 cubic meters per hour.
18	Vacuum pump phase sequence protector	Equipped with a high-vacuum phase sequence protector to prevent the equipment power supply phase sequence from changing, causing the vacuum pump to reverse and return oil to the sterilization chamber
19	Oil mist filter	The product has an exhaust oil mist filter system, which can recover oil mist, prevent oil mist from entering the air, and  return the pump oil through the pump suction to the pump for repeated use to reduce fuel consumption.
20	Control	Equipment self-control;
21	Test method★	Biomonitoring of Bacillus subtilis and Bacillus stearothermophilus
22	Sterilization record	Computer printing provides sterilization time, cycle mode, display pressure and sterilization process, and uses large-capacity storage to save original data, prints records and stores more than 1 million times, can save more than ten years of capacity, and has power-off memory function.
23	Alarm system	Automatic alarm system
24	High frequency power supply specifications	Frequency 13.56MHz, maximum power 500W
25	Plasma generation	Single AC discharge method to ensure 100% plasma discharge success
26	Sterilization residue	Non-toxic,
27	Impact on environment	Safe and no impact
28	Impact on medical staff	The ultraviolet rays generated by the plasma are completely shielded, completely isolated from the operator, and invisible to the naked eye.
29	Safety of sterilant	Hydrogen peroxide undergoes radiofrequency glow ionization to produce water and oxygen.
30	Fully equipped with consumables	Including special plasma indicator cards, tape, packaging bags, sterilizing agents, biological indicators, biological incubators, etc., to ensure supply.
31	Chamber size	(W×H×D)85*46*46cm;	(W×H×D)95*46*46cm;
32	Outside size	(W×H×D)104*78*170cm;	(W×H×D)114*78*170cm;
	Weight	329KG	350KG
33	Power supply	380v ,4.2KVA	380v ,4.6KVA
34	Scope of application	It is suitable for sterilization of instruments that can withstand vacuum negative pressure, hydrogen peroxide gas, and high temperature sensitive instruments (various pipes and hard instruments within 4m), and is not suitable for sterilization of powder, oil and cotton instruments.

Certifications

Packaging & Shipping

Company Profile

FAQ

FAQ:
Q1: Why Choose NANBEI ?
(1).Professional manufacturer with more than 13 years experience
(2).Exported to more than 97% Countries
(3).Turnkey Solution is no problem

Q2:OEM,ODM acceptable or not?
Absolutely Yes

Q3:What's kind of Payment terms for customer choosing?
T/T ,Western Union, Money Gram , Credit Card, Paypal , L/C ...

Q4:Can we visit your factory online?
Absolutely no problem

Q5:Can online video inspection before shipment?
Absolutely no problem

Q6: what's the MOQ ? Sample order is OK?
MOQ:1 set, sample order is no problem

Q7:What's kind of shipment for customer choosing?
Usually ship by sea, by air, by international express .
We can also provide reasonable solutions according to your transportation requirements

Q8:How to ensure product quality and after-sales service?
We have CE, ISO quality certificate, and SGS authentication.

After-sale service:

1. Warranty : 1 year
2. We supply free part for quality problem in warranty
3. Long life technical support and service