Easy Operated Elevator Rope Tension Meter for 5000n
Function
The Elevator rope tensiometer is main used in the elevator traction wire rope tension test.
In elevator installation, acceptance and inspection process, through the test and
adjustment of each tractive ropes,make each rope tension as consistent as possible.
So can prolong the service life of tractive sheave and make the elevator wire rope run more smoothly. The tensiometer can also be used in bridge sling, tower connection line,
overhead conductors, index wire rope and all involving the wire tension tests.
| Model |
DGZ-300 |
DGZ-500 |
DGZ-1000 |
DGZ-3000 |
DGZ-5000 |
| Load |
300N |
500N |
1000N |
3000N |
5000N |
| Resolution |
0.1N |
1N |
| Accuracy |
<=±5% |
| Repeatability |
<=±1% |
| Loading method |
Manual |
| Power |
7.2V Nickel metal hydride rechargeable battery pack |
| Size |
418*128*40 |
| N.W. |
1.7Kg |
ASZ Digital Wire Rope Steel Cable Tension Meter
Function
ASZ Rope Tension Testing Instrument can be applied to various occasions, such as power industry, telecommunications industry, transportation industry, glass curtain wall decoration, ropeway industry, construction industry, pleasure grounds, tunnel construction, fishing, major research institutions and teaching institutions, testing institutions and other occasions involved with the tension of ropes and steel wire ropes.
Features
1. It has the rope structure with tension force, and can be measured directly without the need of being taken apart.
2. It has the light weight, simple structure, convenient operation, and applies to any situations.
3. It has the stable performance, high measurement accuracy, with automatic system compensation function.
When the specification of the tested rope is the same as the rope tension testing instrument rope number, the measurement accuracy can reach 2% error or less within the rated measurement range.
4. It has broader range of measurement, with 15 kinds of rope-diameter measuring functions.
5. Applied range: applied to flexible, stretched ropes, such as various steel wire ropes, high-strength ropes, etc.
6. Accuracy grade: 2~6% of maximum function (depending on the rope form and features).
7. Rope Diameter: ¢6~¢40mm.
HD Digital pressuremeter tension tester
Digital pressuremeter tension tester is a kind of special equipment to measure wind towers, signal transmission and power transmission systems rope tension. It has characters of high precision, easy to operate, easy to carry, etc. also it has many kinds of test modes, convenient to testing. Users can also input gravity acceleration value to make the test more accurately.
Function Characteristics
- High precision, high resolution.
- Five kinds of test modes, three kinds display modes---To improve test efficiency to the greatest extent.
- N (Newton), kg (kg), lb (lb) three testing units for selection, mutual conversion.
- Gravity acceleration setting function---Users can input the precise gravity acceleration value of testing place, make the testing and unit conversion more accurate.
- Peak holding function---Maintain peak display until manual reset.
- Automatic peak function---Maintain peak value can be removed automatically after 2 seconds.
- Can set upper and lower limit value to make statistical analysis, the value more than comparative value, the alarm buzzer will alarm.
- Data stored function, we can store 896 test values.
- 10 minutes without operating automatic shutdown, green initiative.
- High quality charging power,charge voltage from 240V to 100V, can adapt to domestic and foreign most areas,also have short circuit, leakage, overload protection function.
- 2 sets of installation dimensions, adapt to domestic and foreign most test machines,convenient to installation and using.
- Six digit Big screen display.
NZSH handheld digital tension meter
Main use and scope of application
NZSH handheld digital tension meter is a portable electronic digital measuring instrument. It can measure the tension force of filamentou, linear material,widely used in wire and cable,tensile chemical fiber ,metal wire,carbon fiber and other industries. It can measure the tension force and process data accurately.
Product features
1.The three working mode: real-time, hold and peak. The three mode can be switch into each other .
2. CN, gf, OZ, Kgf, N, lb can be set.
3.Accuracy is 0.5% of full scale.
4.It can measure the tension of 10 different materials accurately.
5.With USB communication function.
6.has thickness adjustment function.
7.Easy to store, can store 41 group data
Q1: Why Choose NANBEI ?
(1).Professional manufacturer with more than 13 years experience
(2).Exported to more than 97% Countries
(3).Turnkey Solution is no problem
Q2:OEM,ODM acceptable or not?
Absolutely Yes
Q3:What's kind of Payment terms for customer choosing?
T/T ,Western Union, Money Gram , Credit Card, Paypal , L/C ...
Q4:Can you visit your factory online?
Absolutely no problem
Q5:Can online video inspection before shipment?
Absolutely no problem
Q6: what's the MOQ ? Sample order is OK?
MOQ:1 set, sample order is no problem
Q7:What's kind of shipment for customer choosing?
Usually ship by sea, by air, by international express .
We can also provide reasonable solutions according to your transportation requirements
Q8:How to ensure product quality and after-sales service?
We have CE, ISO quality certificate, and SGS authentication.
After-sale service:
- Warranty : 1 year
- We supply free part for quality problem in warranty
- Long life technical support and service
Please kindly send inquiry to us ~
){kind=link}