Customization: | Available |
---|---|
After-sales Service: | Long Time |
Warranty: | 1 Year |
Still deciding? Get samples of US$ 4719/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
50L Electric Lifting Rotating Double Layer Glass Reactor
Use:
The Electric Lifting Glass Reactor is a commonly used chemical reaction mixing instrument, which is widely used in modern fine chemical industry, scientific research and experiment industries. The Electric Lifting Glass Reactor can be used for concentration, distillation, reflux, separation and purification under constant speed, constant force and constant temperature conditions. The NANBEI glass reactor is an ideal instrument and equipment for teaching, experiment, pilot test and production.
The lifting and rotating glasss reactor is based on the ordinary double-layer reactor, adding the electric lifting and lowering functions of the kettle cover and the stirring system above. When the kettle cover is raised, the kettle body can be rotated 120 degrees to the left by the hand wheel, which is convenient for pouring. Compared with the traditional reactor, it greatly improves the operation efficiency and saves time and cost.
Features for automatic lifting and rotating glasss reactor:
1. The reaction kettle body is made of high borosilicate glass (GG-17 material), which has excellent physical and chemical properties. The bottle body is transparent and the reaction liquid material can be seen.
2. The lid of the kettle is made of polytetrafluoroethylene, which is safer for lifting.
3. The main body is made of cold plate spray plastic + aluminum alloy material, which is beautiful, strong and corrosion-resistant.
4. The stainless steel stirring rod is covered with PTFE, which is suitable for stirring a variety of solvents, and is non-polluting and corrosion-resistant.
5. The lifting and rotating are all agitated by deceleration and booster motors, with stable operation, large torque, no sparks and long service life.
6. The kettle cover and the upper stirring system can be electrically controlled to rise and fall.
7. When the lid of the kettle and the stirring system rise, a limit switch is set at the rising top position, and it stops rising after reaching the position. Note: There is no limit control when the kettle cover and stirring system are lowered, and the operator must not leave the operation site. When lowering to a suitable position, press the stop button in time to prevent the kettle body from being crushed!
8. After the kettle cover and the upper stirring system are raised, the kettle body can be rotated 120 degrees to the left by the hand wheel, which is convenient for pouring and cleaning the kettle body.
9. PTFE components + mechanical seal, proprietary technology, can ensure good vacuum and long service life.
Basic parameters |
Name | Electric lifting and rotating double-layer glass reactor | |||||
glass material | GG-17 | ||||||
frame material | Cold plate spray plastic anti-corrosion + aluminum alloy | ||||||
way of moving | Universal corner wheel with brake | ||||||
Reaction bottle volume | 10L | 20L | 30L | 50L | 100L | ||
Mezzanine capacity | 6L | 8L | 10L | 13L | 18L | ||
Flange oil circulation port | Low in and high out ¢35 flange | ||||||
Number of lids | six | ||||||
discharge port off the ground | 450mm | ||||||
Kettle reaction temperature | -80-250 ºC | ||||||
Vacuum | 0.098Mpa | ||||||
stirring speed | 0-450rpm | ||||||
Stirring shaft diameter | 15mm | ||||||
lifting power | 40W1/12.5 | ||||||
stirring power | 90W1/3 | 120W1/3 | 250W1/3 | ||||
Voltage/frequency(V/Hz) | 220V/50Hz | ||||||
Dimensions (mm*mm*mm) | 910*730*2030(After rising2610) | 910*740*2130(After rising2710) | 980*910*2200(After rising2780) | 1000*910*2300(After rising2880) | 1100*920*2400(After rising2980) | ||
Package size(mm*mm*mm) | 1940*610*1030 | 1950*610*1040 | 2280*670*1090 | 2380*670*1095 | 2480*730*1195 | ||
Packing weight (KG) | 105 | 120 | 135 | 150 | 180 | ||
Function configuration | Speed mode | Frequency | |||||
motor configuration | Low-speed booster motor, speed ratio 3:1 | ||||||
Speed display mode | Digital Display | ||||||
Temperature display mode | PT100 sensor digital display | ||||||
PTFE component mechanical seal | ¢50 flange stirring port | ¢60 flange port | |||||
Vertical high-efficiency double return condenser | 100*600mm | 100*700mm | 120*600mm | ||||
Reflux (distillation) unit | Return elbow with discharge switch, 50# ball mill port | ||||||
Dropping device (constant pressure funnel) | 1L 40#Standard port | 2L 40#Standard port | |||||
pressure relief device | 34# standard port pressure reducing valve | ||||||
Temperature tube | 24# standard mouth | ||||||
solid feed | ¢80 flange with PTFE cover | ||||||
Feeding method | Inclined discharge glass discharge valve, ¢80 flange | ||||||
Vacuum display mode | vacuum gauge | ||||||
Stirring Connection | gimbal connection | ||||||
stirring rod | Scanning + pushing stainless steel rod, outsourcing PTFE | ||||||
Our laboratory glass and experimental instruments are all independently developed, and can be tailored according to the actual requirements of customers. |
Q1: Why Choose NANBEI ?
(1).Professional manufacturer with more than 13 years experience
(2).Exported to more than 97% Countries
(3).Turnkey Solution is no problem
Q2:OEM,ODM acceptable or not?
Absolutely Yes
Q3:What's kind of Payment terms for customer choosing?
T/T ,Western Union, Money Gram , Credit Card, Paypal , L/C ...
Q4:Can we visit your factory online?
Absolutely no problem
Q5:Can online video inspection before shipment?
Absolutely no problem
Q6: what's the MOQ ? Sample order is OK?
MOQ:1 set, sample order is no problem
Q7:What's kind of shipment for customer choosing?
Usually ship by sea, by air, by international express .
We can also provide reasonable solutions according to your transportation requirements
Q8:How to ensure product quality and after-sales service?
We have CE, ISO quality certificate, and SGS authentication.
After-sale service: