| Customization: | Available |
|---|---|
| After-sales Service: | Free Spare Parts, Field Installation, Commissionin |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 373/Set
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Purpose
The digital force gauge with compact size, high accuracy, they are easy to operate and handy to carry out. Widely applied in electron, high & low voltage electrical appliance, hardware, automobile parts, lighter and ignition system, light industry, mechanical, textile, and so on industries for testing of pull or push load test, insertion force or pull and destructive experiment. This digital force gauge is new generation pulls the pressure measuring instrument.
Functional characteristics
1.High precision and high resolution.
2.Five testing modes and three display methods for selection(enhance testing efficiency to the maximum extent).
3.N(Newton),Kg (Kilogram) and Lb (Pound) three measuring units for selection and conversion.
4.Setting function of gravity acceleration----User can input at your option the accurate value of gravity acceleration at the using place so as to make the testing and unit conversion be more accurate.
5.Function of peak value maintaining. Maintain the display of peak value until manual zero clearing.
6.Automatic PEAK function:can set up automatic PEAK time,from 1-9999 seconds.
7.Max. and min. and comparison value can be set for statistic analysis. The buzzer will alarm if exceeding comparison value.
8.Data storage function. 447 testing values can be stored.
9.Data output function. The data can be input into computer through data line for various analyses.
10.Environmental protection. The device will automatically stop if no operation within 10 minutes.If the automatic shutdown is set to 0,the instrument will not shut down.
11.High quality chargeable power supply. The charging voltage is available from 100V to 240V, which can accommodate most areas in domestic and at abroad. It has also protection functions for short circuit, leakage and overload.
12.Special testing function of make-break ability of switch contact to make the make-break testing be more accurate.
13.6 digits large screen display.
14.Low battery detection shutdown,when the battery is running low,the instrument will automatically put-off,it can prevent the low battery caused by Inaccurate measurement.
Structure:
Model specification sheet of force gauge with internal sensor:
| Model | HF-2 | HF-3 | HF-5 | HF-10 | HF-20 | HF-30 | HF-50 | HF-100 | HF-200 | HF-300 | HF-500 |
| Peak load value | 2N | 3N | 5N | 10N | 20N | 30N | 50N | 100N | 200N | 300N | 500N |
| 0.2kg | 0.3kg | 0.5kg | 1kg | 2kg | 3kg | 5kg | 10kg | 20kg | 30kg | 50kg | |
| 0.45Lb | 0.65Lb | 1.1Lb | 2.2Lb | 4.5Lb | 6.5Lb | 11Lb | 22Lb | 45Lb | 65Lb | 110Lb | |
| load division value | 0.001N | 0.01N | 0.1N | ||||||||
| 0.0001kg | 0.001kg | 0.01kg | |||||||||
| 0.0001Lb | 0.001Lb | 0.01Lb | |||||||||
| Sensor structure | Inner sensor | ||||||||||
| Accuracy | ±0.5% | ||||||||||
| Power | 7.2V 1.2V×6 NiMH batteries | ||||||||||
| Data interface | RS 232 nine-hole socket | ||||||||||
| Charging time | 4~6hours | ||||||||||
| The battery of continuous use of time | About 15 hours | ||||||||||
| Battery Life | ≥300 times | ||||||||||
| Charger | Input:AC 220V 50HZ Output:DC 10V 300mA | ||||||||||
| Working temperature | 5ºC~35ºC | ||||||||||
| Transport temperature | -10ºC~60ºC | ||||||||||
| Relative humidity | 15%~80%RH | ||||||||||
| Working conditions | No hypocenter and corrosive medium | ||||||||||
| Model | HF-2000 | HF-5000 | HF-10K | HF-20K | HF-50K | HF-100K | HF-200K | HF-500K | HF-1000K | |||
| Peak load value |
2000N | 5000N | 10KN | 20KN | 50KN | 100KN | 200KN | 500KN | 1000KN | |||
| load division value |
1N | 1N | 0.01KN | 0.01KN | 0.01KN | 0.1KN | 0.1KN | 0.1KN | 1KN | |||
| 0.1kg | 0.1kg | 0.001kg | 0.001kg | 0.001kg | 0.01kg | 0.01kg | 0.01kg | 0.1kg | ||||
| 0.1lbs | 0.1lbs | 0.001Klbs | 0.001Klbs | 0.001Klbs | 0.01Klbs | 0.01Klbs | 0.01Klbs | 0.1Klbs | ||||
| Indication error |
±1% | ±1% | ||||||||||
| Unit | N / (KN), kg / (Mg or t), lb (KIb) | |||||||||||
| Data interface |
Rs232 nine-hole socket | |||||||||||
| Power | rechargeable batteries, charger(charging voltage 100V-240V) | |||||||||||
| Sensor structure |
S-tye or column sensor with high precision (external sensor) | |||||||||||
| Ambient temp. |
5° C~35° C | |||||||||||
| Transport temp. |
-10° C~60° C | |||||||||||
| Relative humidity |
15%~80%RH | |||||||||||
| Working conditions |
No hypocenter and corrosive medium | |||||||||||
| Gross weight |
6 kg | 9 kg | 24 kg | 36 kg | ||||||||
| Size | 280 x 200 x 170 mm | 310 x 260 x 190 mm | ||||||||||
| ATH Spring Tester | ANL Torque Meter | ANJ-M Torque Wrench Calibration Tester |
|
|
|
| Please click to details | Please click to details | Please click to details |
Q1: Why Choose NANBEI ?
(1).Professional manufacturer with more than 13 years experience
(2).Exported to more than 97% Countries
(3).Turnkey Solution is no problem
Q2:OEM,ODM acceptable or not?
Absolutely Yes
Q3:What's kind of Payment terms for customer choosing?
T/T ,Western Union, Money Gram , Credit Card, Paypal , L/C ...
Q4:Can you visit your factory online?
Absolutely no problem
Q5:Can online video inspection before shipment?
Absolutely no problem
Q6: what's the MOQ ? Sample order is OK?
MOQ:1 set, sample order is no problem
Q7:What's kind of shipment for customer choosing?
Usually ship by sea, by air, by international express .
We can also provide reasonable solutions according to your transportation requirements
Q8:How to ensure product quality and after-sales service?
We have CE, ISO quality certificate, and SGS authentication.
After-sale service:
){kind=link}