| After-sales Service: | on Line Service |
|---|---|
| Warranty: | One Year |
| Max Diameter of Workpiece: | 1800mm |
| Mass Scope of Workpiece: | 8000kg |
| Type: | Gloss Meter |
| Maxcapacity: | >1000KN |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Portable CLEDs Data Color Spectrophotometer for Dyeing Factory
1. Brief Introduction
1).Our device adopts internationally agreed observe condition D/8 (Diffused lighting, 8 degrees observe angle) and SCI(specular reflection included)/SCE(specular reflection excluded). It could be used for color matching for many industries and widely used in painting industry, textile industry, plastic industry, food industry, building material industry and other industries for quality control.
2).Camera view to catch the testing area (Patent Right Number: ZL20130519382X)
In previous measurement instrument, we can only aim at the testing area approximately, and this may introduce errors. Our spectrophotometers include a camera in our optical system, and the user can clearly see the tested area to avoid measurement errors.
3).Uses CLEDs light source - spectrally balanced LED light source (Patent Right No.: ZL2013107548347)
LED light source that has balanced intensity across visible spectrum avoids the spectral deficiency in certain parts of the spectrum in common white LEDs, and guarantees the speed of the measurement and the accuracy of the results. This research finding has been published in national leading, SCI included optical journal, Chinese Optics Letter.
4.)ETC Every Time calibration technology
Currently, most instruments use standard white boards for calibration. When white board is damaged, the instrument's accuracy or precision will no longer be guaranteed. In NANBEI pec's spectrophotometers, it uses innovative ETC(Every Test Calibration); standard white board is included in the optical system, and therefore has reliable accuracy and repeatability in every measurement.
5).Color QC Software
Our spectrophotometer comes with the color QC software, which is applicable in various industries' quality control and management of color data. It turns color into numerical data, compares color differences, generate measurement reports. provides measurement data under different color spaces and customizes color management for each customer.6).Automatic gloss compensation technology
Different gloss, or different instrument's lighting or observation conditions will largely affect the measurement of color. The automatic gloss compensation technology guarantees the accuracy of color measurement data for surfaces of different gloss. This research finding is published in international leading, SCI included journal, Optik.7).Innovative light splitting SCS optical engine(Patent Right No.:ZL201210337619.2)
Adopt innovative single-grating-dual-light-paths light splitting system: SCS optical engine, creates the best measurement repeatability for portable spectrophotometers in the industry, and guaranteed accurate measurement of surface color of materials.
8).The most complete and color indicators compares with similar instruments.
Comparing with similar products, our spectrophotometers offer the most complete, 28 kinds of standard light sources for lighting conditions and 40 measurement color value indicators; It can also customize measurement methods according to your requirement, and satisfy all your color measurement needs.
9).Longest Device Guarantee Time
a. Three Years Guarantee Time.
b. If testing data is not correct, we can do refund.
c. We will provide testing report for every device to assure the authority of the data and it will save the calibration cost for 1 year.
| Type | CS-580A/B |
| Illumination | d/8(Diffused lighting, 8 degrees observe angle),SCI(specular reflection included)/SCE(specular reflection excluded)simultaneous measurement.(conform to CIE No.15,ISO 7724/1,ASTM E1164,DIN 5033 Teil7, JIS Z8722 Condition c standards) |
| Size of integrating sphere | Φ40mm, diffused reflection surface coating |
| Illumination Light source | CLEDs(entire wavelength balanced LED light source) |
| Sensor | dual light path sensor array |
| Wavelength Range | 400-700nm |
| Wavelength Interval | 10nm |
| Half spectral width | 5nm |
| Reflectivity range | 0-200% |
| Reflectivity resolution | 0.01% |
| Observation angle | 2°/10° |
| Measurement light source | A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12,DLF,TL83,TL84,NBF,U30,CWF |
| Data being displayed | SPD distribution/data,sample's color values,color difference values/graph,pass/fail results,color error tendency,color simulation,display measurement area,history data color simulation,manual input standard sample,generate measurement report |
| Measurement time interval | 2 seconds |
| Measurement time | 1 second |
| Color space | CIE-L*a*b, L*C*h, L*u*v, XYZ, Yxy, Reflectance |
| Color difference formulas | ΔE*ab, ΔE*CH, ΔE*uv, ΔE*cmc(2:1), ΔE*cmc(1:1),ΔE*94,ΔE*00 |
| Other colorimetric indices | WI(ASTM E313-10,ASTM E313-73,CIE/ISO, AATCC, Hunter, Taube Berger, Ganz, Stensby); YI(ASTM D1925,ASTM E313-00,ASTM E313-73);Tint(ASTM E313,CIE,Ganz) Metamerism index Milm, Stick color fastness, Color fastness |
| Repeatability | light splitting reflectivity:standard deviation within 0.08% |
| color values:ΔE*ab<=0.03(After calibration, standard deviation of 30 measurements on test white board, 5 second intervals), Maximum:0.05 |
|
| Battery capacity | rechargeable, 10000 continuous tests, 7.4V/6000mAh |
| Interface | USB |
| Data storage | 20000 test results |
| Light source longevity | 5 years, 1.5 million tests |
| Inter-instrument agreement | ΔE*ab within 0.2(BCRA color charts II, average of the 12 charts) |
| Size | 181*73*112mm(L*W*H) |
| Weight | about 550g(does not include battery's weight) |
| Display | True color screen that includes all colors |
| Work temperature range | 0~45ºC, relative humidity 80% or below( at 35°C ),no condensation |
| Storage temperature range | -25ºC to 55ºC,relative humidity 80% or below(at 35°C ),no condensation |
| Standard accessories | DC adapter, Lithium battery, manual, color management software, drive software, electronic manual, color management guide, USB cable, black/white calibration tube, protective cover, spire lamella, portable bag, electronic color charts |
| Optional accessories | powder molding device, micro printer, measurement and test report |
| Color matching system | not match |
| UV light source | without UV light source |
1. How can I choose the suitable one?
Dear customer, please tell us your detailed requirements by mail or online, we will recommend the suitable one as your request.
2. Does your price is competitive?
Dear customer, we make sure to offer you the best quality with competitive price.
3. How can I pay?
Dear customer, we accept many payment term, such as T/T, Western Union…
4. When I receive it after pay?
Dear customer, normal models can be delivered with 5-7days, please contact us to check transport time to your address.
5. How to deliver?
Dear customer, we can send by Express, by Sea and by Air.
6. Is will be broken during transport?
Dear customer, please do not worry, we do standard export package.
7. What should I do if I do not know how to use?
Dear customer, please do not worry, manual user will be sent together, you can also contact us with more technological support.
8. What should I do if some parts broken?
Dear customer, please do not worry, we have 12months warranty except wear parts. You can also buy parts from us after 12months.
Pre-sale service
· 24hours online to ensure quick response to customers' inquiry or online message;
· Guide customers to choose the best suitable machine model;
· Offer detailed specification and competitive prices;
Contract execution
· Machine production will be arranged strictly according to the contract;
· Machine photos will be sent to you for inspection during production;
· Send customs clearance documents by DHL;
· Update latest news after delivery and prepare customs clearance;
After-sale service
· 12 months warranty except for wear parts;
· Broken spare parts (except for wear parts) will be sent for free due to quality problems;
· In time response to customers technical problems;
· New products update for customers' reference.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}